Fluid – Air Heat Recovery
Heatcraft®’s Heat Recovery fluid coils incorporate many of the features found in Heatcraft®’s Fluid Heating and Cooling coils. They are incorporated in what is commonly referred to as a run-around or loop heat recovery system. Heat Recovery Coils are most often located in an air handling system’s supply and exhaust air stream. They may also be applied in an industrial process’ exhaust stream to recover and reuse the thermal energy.
| Fluid HR Coil Construction | Americas | EMEA | APAC |
| Tubing | 3/8”, 1/2” O.D. Cu & 5/8” O.D. Cu, CuNi, St Stl, Carbon Stl, AD Brass | 1/2”, 15mm (P40) O.D. Copper | N/A |
| Circuit Type | Quarter, Half, Three Quarter, Single, One and one half, Double, Triple or Custom | Upon request | N/A |
| Rows | 1, 2, 3, 4, 5, 6, 8, 10, 12 | 4, 6, 8, 10,12, 14, 16, 18., 20, 22, 24 | N/A |
| Fin Surface | Sine Wave (corrugated), New Ripple (peak and valley) or Flat | Louvered or flat (slightly louvered) | N/A |
| Tube Patterns | Various | Various | N/A |
| Casing / Mounting | Galvanized Steel, Stainless Steel, Carbon Steel, Copper or Aluminum | Galvanized Steel, Stainless Steel, AcidProof, AluZink® or Aluminum | N/A |
| Connections | Carbon Steel, Stainless Steel, Red Brass, Copper (Braze, MPT, FPT, Victaulic, Welded) | Copper, Steel threaded | N/A |
| Vents & Drains | Standard | Upon request | N/A |
| Fin Material | Aluminum, Copper all tube sizes Stainless Steel, Carbon Steel – 5/8″ Only | Aluminum, Copper, Corropaint (epoxy coated), Pre tinned copper, hydro paint | N/A |
| Options | ElectroFin coating, Bolting Flanges, Cleanable Tubes, Universal Hand, TurboSpirals | Flanged conn., turned or L-header, ElectroFin® E-Coating, Heresite® Coatings | N/A |
| Links | Fluid Catalog Fluid Coil Specification Fluid Coil Installation, Operation and Maintenance Desaturation Coil Article Certified Drawing: Cooling Coil > 2Row Certified Drawing: 1 and 2 Row Fluid Coils Certified Drawing: Desaturation Coil Certified Drawing: Cleanable > 2 Row Certified Drawing: Mist Eliminator |
VENTILATION HEAT EXCHANGER Tube Patterns |
N/A |
| Fluid HR Coil Construction | Americas | EMEA | APAC |
| Tubing | 3/8”, 1/2” O.D. Cu & 5/8” O.D. Cu, CuNi, St Stl, Carbon Stl, AD Brass | 15mm, Ø 1/2″ | 3/8” O.D. Cu & 1/2”, 5/8” O.D. Cu, CuNi, St Stl |
| Circuit Type | Quarter, Half, Three Quarter, Single, One and one half, Double, Triple or Custom | Upon request | Quarter, Half, Three Quarter, Single, One and one half, Double, Triple or Custom |
| Rows | 1, 2, 3, 4, 5, 6, 8, 10, 12 | From 1 – To 12 (over upon request) | 1, 2, 3, 4, 5, 6, 8, 10, 12 |
| Fin Surface | Sine Wave (corrugated), New Ripple (peak and valley) or Flat | Sine wave, Flat, Special flat / Louvered | Louver, Sine Wave (corrugated) , New Ripple (peak and valley) or Flat |
| Tube Patterns | Various | Various | Various |
| Casing / Mounting | Galvanized Steel, Stainless Steel, Carbon Steel, Copper or Aluminum | Aluminum, Galvanized Steel, Stainless Steel, AcidProof, AluZink®, Copper, Brass | Galvanized Steel, Stainless Steel, Carbon Steel, Brass or Aluminum |
| Connections | Carbon Steel, Stainless Steel, Red Brass, Copper (Braze, MPT, FPT, Victaulic, Welded) | Copper, Iron, Steel threaded | Carbon Steel, Stainless Steel, Red Brass, Copper (Braze, MPT, FPT, Victaulic, Welded) |
| Vents & Drains | Standard | Upon request | Standard |
| Fin Material | Aluminum, Copper all tube sizes Stainless Steel, Carbon Steel – 5/8″ Only | Aluminum, Copper, Pre-painted or Hydrophilic Aluminum, Tinned copper, Corropaint | Al, AlMg, Copper all tube sizes, Stainless Steel-5/8″ Only |
| Options | ElectroFin coating, Bolting Flanges, Cleanable Tubes, Universal Hand, TurboSpirals | ElectroFin® E-Coat, Heresite® coatings, Alt. fin spacing, Bent coils, Flanged conn., Turned or L-header, mist eliminator | E-coating, Universal Hand, TurboSpirals |
| Links | Fluid Catalog Fluid Coil Specification Fluid Coil Installation, Operation and Maintenance Desaturation Coil Article Certified Drawing: Cooling Coil > 2Row Certified Drawing: 1 and 2 Row Fluid Coils Certified Drawing: Desaturation Coil Certified Drawing: Cleanable > 2 Row Certified Drawing: Mist Eliminator |
VENTILATION HEAT EXCHANGER Tube Patterns |
N/A |
